Chapter 9. Snmp Interface; Snmp Interface; Management Information Base (Mib) Files - Comtech EF Data CDM-710 Installation And Operation Manual

Chapter 9. SNMP INTERFACE

9.1

SNMP Interface

The Simple Network Management Protocol (SNMP) is an application-layer protocol designed to
facilitate the exchange of management information between network devices. The CDM-710
SNMP agent supports both SNMPv1 and v2c.
For proper SNMP operation, the CDM-710 MIB files must be used with the
associated version of the CDM-710 modem M&C Software. Refer to the CDM-710
SW Release Notes for information on the required FW/SW compatibility.
IMPORTANT
9.2

Management Information Base (MIB) Files

MIB files are used for SNMP remote management and consist of Object Identifiers (OIDs). Each
OID is a node that provides remote management of a particular function. A MIB file is a tree of
nodes that is unique to a particular device. There are seven MIB files associated with the
CDM-710:
9–1