Removing An Offline Device - Brocade Communications Systems Brocade 8/12c User Manual

5. Perform one of the following actions:
6. Click OK or Apply to save your changes.

Removing an offline device

The Management application enables you to remove an offline device from all zones and zone
aliases in the selected zone DB.
1. Select Configure > Zoning > Fabric.
2. Select an FC fabric from the Zoning Scope list.
3. Select Offline Utility from the Zone DB Operation list.
4. Select the check box for the offline device you want to remove in the Remove column.
5. Click OK on the Offline Device Management dialog box.
6. Click OK on the message.
7.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Right-click the name of the zone you want to remove in the Zone Configurations list and
select Remove.
•
To remove multiple zones, select the zones to be removed from the zone configuration,
and click the left arrow between the Zones list and the Zone Configurations list.
When successful, the zone is removed from the Zone Configurations list.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Offline Device Management dialog box displays.
Select the Remove check box to select all offline devices.
A warning message displays informing you that the selected zone members will be replaced
from all zones and aliases in the selected zone DB.
Click OK or Apply on the Zoning dialog box to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Zoning administration
19
625