Card Layout For Cs700 T1/E1/Isdn System - Avaya CS700 Installing Instructions

Card Layout for CS700 T1/E1/ISDN System

The chassis for the CS700 setup for T1/E1/ISDN operation appears as follows:
Up to 6 DSP Cards
First DSP may have
optional RCA jack for
Analog Audio Input
Optional Embedded CRS
or blank cover plate
There is one DSP card for each T1/E1/ISDN network interface card.
On the back of the chassis, there are transition cards for the power supply (power connections),
the embedded CRS card (if present), the CPU card, and for each T1/E1/ISDN network interface
card. Other card types do not require transition cards. Unused slots on the back of the chassis
have blank cover plates.
A combination floppy drive/CD-ROM drive and a removable hard drive are mounted on the right
side of the upper bay.
Up to 6 T1/E1/ISDN
Network Interface Cards
CPU and CPU option
Optional SCSI RAID connector
(shown) or blank cover plate
Installing the CS700/CS780 Chassis
Power Supplies
Blank cover plate
Issue 1 July 2006
Up to 4
31