System Password (#403); Programming; Considerations - Avaya PARTNER Advanced Communications System Installation And Use Manual

Programming

To change the Star Code Dial Delay setting:
f00ss#410
1. Press
The current setting is displayed.
2. Press the number on the dialpad for the setting you want, or press
the correct setting appears:
0 = 0 Second Delay (the factory setting) 
1 = 1 Second Delay
2 = 2 Seconds Delay
3 = 3 Seconds Delay
4 = 4 Seconds Delay
5 = 5 Seconds Delay
6 = Not Active
3. To return to the default setting, press
4. Select another procedure, or exit programming mode.

System Password (#403)

Use this feature to define a four-digit password that users can enter from PARTNER and MLS
telephones to override dialing restrictions (if the extension has access to an outside line).

Considerations

This feature is available only on PARTNER and MLS telephones.
The password overrides all dialing restrictions except Line Access Restriction (#302) and
Pool Access Restriction (#315).
Once a password is programmed, you must enter it to turn Night Service on and off.
Additionally, if Night Service is on, users in the Night Service Group must enter the
password to make any outgoing calls (except calls to numbers on the Emergency Phone
Number List (#406) and Marked System Speed Dial numbers). Dialing restrictions for
extensions not in the Night Service Group remain the same as during normal daytime
operation.
4
at extension 10 or 11.
r
.
4
4
Programming System Options
D d
or

System Password (#403)

until
4-61