Configure Debug-Trace Ipxrip-Route - Extreme Networks ExtremeWare Command Reference Manual

configure debug-trace ipxrip-route

configure debug-trace ipxrip-route <debug level>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the "i" series switches.
Syntax Description
debug level
Default
The default level is 0.
Usage Guidelines
The
debug level
record the messages recorded at lower levels.
Example
The following command sets the reporting level for IPX RIP route errors to 2:
configure debug-trace ipxrip-route 2
Following is the log output at this level:
<DBUG:XRIP> Added route to net f0220666 g/w f0001964:00:01:30:32:8d:00, hops 2, tics 2
<INFO:SYST> Log cleared
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on"i" platforms only.
ExtremeWare 7.7 Command Reference Guide
Specifies a debug level:
0 — None.
1 — None.
2 — Displays route additions and deletions.
3 — No additional information recorded.
4 — No additional information recorded.
5 — No additional information recorded.
range is 0 to 5. Higher levels record more verbose messages. Higher levels also
configure debug-trace ipxrip-route
1197