Delete Log Filter - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Status Monitoring and Statistics

delete log filter

delete log filter [<filter name> | all]

Delete a log filter with the specified name.

Syntax Description

Specifies the filter to delete.

Specifies that all filters, except DefaultFilter, are to be deleted

Usage Guidelines

This command deletes the specified filter, or all filters except for the filter DefaultFilter. The specified

filter must not be associated with a target. To remove that association, associate the target with

DefaultFilter instead of the filter to be deleted, using the following command:

configure log target <target> filter DefaultFilter

The following command deletes the filter named fdb2:

delete log filter fdb2

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7