Unconfigure Sflow Collector - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

unconfigure sflow collector

unconfigure sflow collector [<ip-address> | all]
Description
Removes the IP addresses of a selected sFlow collector or all sFlow collectors so that sampled flows are
no longer sent to the specified collector or collectors.
NOTE
This command is available only on the "i" series switches.
Syntax Description
ip-address Specifies the IP address of configured collector to reset.
all Specifies the IP addresses of all configured collectors to reset.
Default
N/A
Usage Guidelines
This command removes the IP address of one or all configured sFlow collectors. No counters or flow
samples will be sent to these collectors.
Example
The following command removes IP addresses of all configured sFlow collectors:
unconfigure sflow collector all
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available only on "i" series platforms.
836 ExtremeWare 7.7 Command Reference Guide