Disable Wireless Ports Interface Ap-Scan Off-Channel - Extreme Networks ExtremeWare Command Reference Manual

disable wireless ports interface ap-scan off-channel

disable wireless ports <portlist> interface [1 | 2] ap-scan off-channel [at
| every] <time>
Description
Stops the access point (AP) scan on the indicated interface at the specified time.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
at Specifies a once-only start time for a scan.
every Specifies to start the scan every day at the specified time.
time Specifies the hour in the format (0-23)
Default
N/A
Usage Guidelines
Use this command to stop the off-channel AP scan.
Example
The following command disables port 23 using interface 1 on the Summit 300-24:
disable wireless ports 23 interface 1 ap-scan off-channel at 18
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
disable wireless ports interface ap-scan off-channel
1355