Configure Wireless Management-Vlan - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless management-vlan

configure wireless management-vlan <vlan name>
Description
Identifies the VLAN on which the Altitude 300 wireless port communicates with the Summit 300
switch.
Syntax Description
vlan name The name of the VLAN with which the Altitude 300 wireless port communicates with the Summit 300
switch.
Default
Default VLAN
Usage Guidelines
Identifying the VLAN on which the Altitude 300 wireless port communicates with the switch is
required before wireless features can work. This VLAN can be the default VLAN and it can either have
a public or private IP address. This VLAN is an untagged VLAN on which all the Altitude 300 devices
are connected.
Example
The following example configures the switch level property for the default gateway:
configure wireless management-vlan Default
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1310 ExtremeWare 7.7 Command Reference Guide