Configure Vlan Add Ports No-Restart - Extreme Networks ExtremeWare Command Reference Manual

ESRP Commands

configure vlan add ports no-restart

configure vlan <vlan name> add ports [<portlist> | all] no-restart
Description
Disables port restart for a port.
Syntax Description
vlan name
portlist
all
Default
N/A.
Usage Guidelines
To disable port restart, you either delete the ports and then add them again with the
option, or directly add the ports with the
Example
The following command disables port restart for ports 7-9 on VLAN esrp1:
configure vlan esrp1 add ports 7-9 no-restart
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1516
Specifies an ESRP-enabled VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports.
option.
no-restart
no-restart
ExtremeWare 7.7 Command Reference Guide