Enable Web Http Access-Profile - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

enable web http access-profile

enable web http access-profile [none | <access-profile>] port <port number>
Description
Allows HTTP access on the specified (non-default) port.
Syntax Description
none Specifies not to use an access profile when accessing HTTP.
access-profile Specifies the name of an access profile to use when accessing HTTP.
port number Specifies the port number to use to access HTTP.
Default
N/A
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTP usage.
Example
The following example enables HTTP access using the access profile named open_web on slot 1, port 4:
enable web http access-profile open_web port 1:4
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
1050 ExtremeWare 7.7 Command Reference Guide