Wireless Commands
show wireless ports interface ap-scan configuration
show wireless ports [<portlist> | all] interface [1 |2] ap-scan
configuration {detail}
Description
Displays the current configuration of the scan feature for the selected ports and interface.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all
Specifies all active ports.
interface
Specifies an interface: 1 or 2.
detail
Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to see the current configuration of the AP scan feature for the specified wireless port
and interface. Use the optional keyword,
Examples
The following example displays the configuration of port 1:5 and interface 1:
show wireless ports 1:5 interface 1 ap-scan configuration
The output of the command is similar to:
Intf
En
Add Rem Update Probe ProbeInt OCS Cont. Size Timeout Channels
-------------------------------------------------------------------------------
1:5:1
N
off off off
The following example shows the extra details shown when the keyword
command:
show wireless ports 1:5 interface 1 ap-scan configuration detail
The output of the command is similar to:
Interface
Enabled
Send Added Trap
Send Removed Trap
Send Updated Trap
Probe Interval
Send Probe
Result Table Size
1396
, to see the detailed or expanded configuration.
detail
off
100
N
N
: 1:5:1
: N
: off
: off
: off
: 100 (msec)
: N
: 128
128
300
is added to the
detail
ExtremeWare 7.7 Command Reference Guide