Show Rf-Profile - Extreme Networks ExtremeWare Command Reference Manual

show rf-profile

show rf-profile {<profile_name>}
Description
Displays configuration attributes for a particular RF profile or all RF profiles.
Syntax Description
profile_name
Default
All
Usage Guidelines
Use this command to display configuration attributes for a particular RF profile or all RF profiles. If you
do not enter an RF profile name, configuration attributes are displayed for all RF profiles.
Example
The following command displays configuration information about the RF profile named rfprof_alpha:
show rf-profile rfprof_alpha
The output from this command is similar to:
Beacon Interval:
Fragmentation Length:
No interfaces bound to this RF profile
The following command displays configuration information about all RF profiles:
show rf-profile
The output from this command is similar to:
Beacon Interval:
Fragmentation Length:
ExtremeWare 7.7 Command Reference Guide
Specifies the name of the RF profile whose configuration is to be displayed. If you do not enter an
RF profile name, configuration attributes will be displayed for all RF profiles.
Profile Name: rfprof_alpha
Mode: G
1000
DTIM: 100
2345
RTS Threshold: 2330
Preamble: Long
Short Retry: 4
Long Retry: 7
Profile Name: DEFAULT_A
Mode: A
40
DTIM: 2
2345
RTS Threshold: 2330
Preamble: Short
Short Retry: 4
show rf-profile
1377