Configure Netlogin Dot1X Guest-Vlan Supplicant-Response-Timeout - Extreme Networks ExtremeWare Command Reference Manual

configure netlogin dot1x guest-vlan
supplicant-response-timeout
configure netlogin dot1x guest-vlan supplicant-response-timeout <response
timeout>
From ExtremeWare 7.7, this command is modified to:
configure netlogin dot1x timers supplicant-response-timeout
<supplicant-response-timeout>
Description
This command configures the supplicant response timer for the 802.1x guest VLAN feature. If the
supplicant does not respond to 802.1x EAPOL requests for a time equal to 3 times the configured
supplicant response time, the port is moved to the guest VLAN.
Syntax Description
response timeout
Default
The default value is 30 seconds.
Usage Guidelines
The supplicant response timeout value is a global setting that is applicable for all the
guest-VLAN-enabled ports.
Example
The following example configures a supplicant response timer of 60 seconds:

configure netlogin dot1x guest-vlan supplicant-response-timeout 60

History
This command was first available in ExtremeWare 7.6.
This command was updated in ExtremeWare 7.7. The new command is:
configure netlogin dot1x timers supplicant-response-timeout
<supplicant-response-timeout>
Platform Availability
This command is available on all platforms except the Altitude 300 Access Point.
ExtremeWare 7.7 Command Reference Guide
Specifies the length of time the switch waits for a response from the supplicant. The range
is 1 to 120 seconds.
configure netlogin dot1x guest-vlan supplicant-response-timeout
889