Unconfigure Sys-Health-Check Alarm-Level Msm - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

unconfigure sys-health-check alarm-level msm

unconfigure sys-health-check alarm-level msm
Description
Returns the switch to using the globally configured alarm level response for MSMs.
NOTE
This command is available only on the BlackDiamond switches.
Syntax Description
The command has no arguments or variables.
Default
N/A
Usage Guidelines
You can configure a health-check alarm-level response for MSMs that is different from the response
configured for the backplane and other modules. This command removes such a health-check alarm
level configuration that has previously been set for MSMs.
To configure a health-check alarm-level response for MSMs, use the
configure sys-health-check
command.
alarm-level msm
Example
The following command returns the switch to its default of sending error messages to the syslog:
unconfigure sys-health-check alarm-level msm
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available only on BlackDiamond switches.
838 ExtremeWare 7.7 Command Reference Guide