Configure Wireless Ports Ipaddress - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports ipaddress

configure wireless ports <port> ipaddress <address>
Description
Configures the source IP address for the specified port.
Syntax Description
port Specifies a single port or slot and port. May be in the form 1 or 1:2.
address Indicates the source IP address. The IP address must be an IP address on the management VLAN.
Default
The default address is 0.0.0.0.
Usage Guidelines
The source IP address can be public or private IP addresses in class A through class C. Each port
requires a unique IP address
Example
The following command configures the default IP address for port 1:18 on the Summit 300-48:
configure wireless ports 1:18 192.168.0.100.18
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1342 ExtremeWare 7.7 Command Reference Guide