Configure Security-Profile Wpa-Psk - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure security-profile wpa-psk

configure security-profile <name> wpa-psk [hex <hexadecimal_digit> |
passphrase <alphanumeric_string>]
Description
Configures the WPA pre-shared key to have the specified hexadecimal or alphanumeric value.
Syntax Description
name Specifies the names of the security profile.
hex Specifies the WPA pre-shared key type as hexadecimal.
hexadecimal digit Specifies a 64-byte hexadecimal key.
alphanumeric_string Specifies a passphrase name in ASCII alphanumeric notation (8-63 characters long)
Default
N/A
Usage Guidelines
Use this command to configure the WPA pre-shared key using a hexadecimal (64 bytes) digit or ASCII
alphanumeric string (8 to 63 characters long).
Examples
The following example configures the WPA pre-shared key "abcdefgh" for the security profile sec_prof1:
configure security-profile sec_prof1 wpa-psk passphrase abcdefgh
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e and to the "i"
series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
932 ExtremeWare 7.7 Command Reference Guide