Extreme Networks ExtremeWare Command Reference Manual page 918

Security Commands
Example
The following example sets the security profile open-auth to use the VLAN open-vlan:
configure security-profile open-auth default-user-vlan open-vlan
The following example sets the option so that the remote connect Altitude 300 AP can send
untagged
the user traffic untagged:
configure security-profile open-auth default-user-vlan open-vlan untagged
History
This command was first available in ExtremeWare 6.2a. It was added to the "e" series in 7.3e and to the
"i" series in 7.3.0. In 7.6, the option to specify tagged or untagged was added.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
The option to specify tagged or untagged is applicable only to Summit 300-48 switches.
918 ExtremeWare 7.7 Command Reference Guide