ESRP Commands
disable elrp-client
disable elrp-client
Description
Disables the Extreme Loop Recovery Protocol (ELRP) client (standalone elrp) globally.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command disables the ELRP globally so that none of the ELRP VLAN configurations take effect.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the
enable
command to globally enable the ELRP client.
elrp-client
Example
The following command globally disables the ELRP client:
disable elrp-client
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
1552
ExtremeWare 7.7 Command Reference Guide