Commands for Status Monitoring and Statistics
enable sys-hardware-recovery polling
enable sys-hardware-recovery polling
Description
Enables the hardware recovery mechanism to work in an active polling mode.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables.
Default
The polling mechanism is disabled by default.
Usage Guidelines
N/A
Example
The following command enables the active polling mode for the system hardware recovery mechanism:
enable sys-hardware-recovery polling
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available only on "i" series platforms.
776
ExtremeWare 7.7 Command Reference Guide