Enable Access-List - Extreme Networks ExtremeWare Command Reference Manual

enable access-list

enable access-list <name> [counter | log]
Description
Enables message logging or the collection of access-list statistics.
NOTE
This command is available only on the "i" series switches.
Syntax Description
name Specifies the name of the access list.
counter Specifies that access-list statistics should be collected.
log Specifies that a message should be logged to the Syslog facility for each packet that matches the
access-list description. The message details the properties of the packet.
Default
Counting is on; logging is off.
Usage Guidelines
None
Example
The following command enables statistics collection for access list allow102:
enable access-list allow102 counter
The following command enables logging of packets for access list allow102:
enable access-list allow102 log
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms only.
ExtremeWare 7.7 Command Reference Guide
enable access-list
1019