Show Vlan Stpd - Extreme Networks ExtremeWare Command Reference Manual

show vlan stpd

show vlan <vlan name> stpd
Description
Displays the STP configuration of the ports assigned to a specific VLAN. It is an alternate syntax to the
show stpd <spanning tree name> ports vlan <vlan name>
Syntax Description
vlan name Specifies a VLAN name.
Default
N/A
Usage Guidelines
If you have a VLAN that spans multiple STPDs, use this command to display the STP configuration of
the ports assigned to that specific VLAN.
This command displays the following:
• STPD port configuration
• STPD port mode of operation
• STPD path cost
• STPD priority
• STPD state (root bridge, and so on)
• Port role (root bridge, edge port, and so on)
• STPD port state (forwarding, blocking, and so on)
• Configured port link type
• Operational port link type
Example
The following command displays the spanning tree configurations for the vlan Default:
show vlan default stpd
The results for this command are as follows:
* Summit1iTx:30 # show vlan "Default" stpd
s0(enabled)
Port Mode
1 802.1D FORWARDING 19
2 802.1D FORWARDING 4
3 802.1D DISABLED
4 802.1D DISABLED
5 802.1D FORWARDING 19
ExtremeWare 7.7 Command Reference Guide
Tag: (none) Ports: 8
State Cost Flags Priority Port ID Designated Bridge
e-Dbb-d- 16
e-Rbb-w- 16
4 e------- 16
4 e------- 16
e-Dbb-w- 16
command.
Root/P/C: 80:00:00:01:30:1d:48:30/2/4
16385 80:00:00:01:30:b6:99:10
16386 80:00:00:01:30:1d:48:30
16387 00:00:00:00:00:00:00:00
16388 00:00:00:00:00:00:00:00
16389 80:00:00:01:30:b6:99:10
show vlan stpd
1631