Enable Wireless Ports Interface Ap-Scan - Extreme Networks ExtremeWare Command Reference Manual

enable wireless ports interface ap-scan

enable wireless ports <portlist> interface [1 |2] ap-scan
Description
Starts a wireless port on-channel scan for the indicated port or ports and interface for the Altitude 300.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to start the wireless port on-channel scan on the indicated port and interface for the
Altitude 300. The Altitude 300 continues to carry user traffic during scans operating on the current
channel ("on-channel" scans).
Example
The following command enables interface 2 on ports 1:18 to 1:28 on a Summit 300-48:
enable wireless ports 1:18-1:28 interface 2 ap-scan
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
enable wireless ports interface ap-scan
1365