Show Wireless Ports Interface Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface configuration

show wireless ports [<portlist> | all] interface [1 | 2] configuration
{detail}
Description
Displays information about wireless configuration for the selected ports and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to show in table or list format the configuration and state of the interface of the
selected port or ports.
Examples
The following example displays information about the wireless port configuration for ports 1:26-1:30
and interface 1:
show wireless ports 1:26-1:30 interface 1 configuration
Output of the command is similar to:
Port Intf State RF Prof.
-------------------------------------------------------------------------------
1:26 1 EN
1:27 1 EN
1:28 1 EN
1:29 1 EN
1:30 1 EN
EN- Enabled, DIS - Disabled
The following example shows the extra details shown when the keyword
command:
show wireless ports 1:26-1:30 interface 1 configuration detail
ExtremeWare 7.7 Command Reference Guide
Sec. Prof.
rf_26 Unsecure
rf_27 Unsecure
rf_28 Unsecure
DEFAULT_A Unsecure
DEFAULT_A Unsecure
show wireless ports interface configuration
TxRate Power Chan. Max Cl. Bridging
54 FULL 0 100
54 FULL 0 100
54 FULL 0 100
54 FULL 0 100
54 FULL 0 100
detail
EN
EN
EN
EN
EN
is added to the
1421