Configure Wireless Ports Interface Rf-Profile - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface rf-profile

configure wireless ports <portlist> interface [1 | 2] rf-profile <name>
Description
Attaches a port or ports and interface to an RF profile.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
name Specifies the name of the profile.
Default
A for interface 1.
B_G for interface 2.
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and
interface 2 supports 802.11b/g radio signals. The
allows you to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the RF profile radio1 to interface 1 on port 1:7 on a Summit 300-48:
configure wireless port 1:7 interface 1 security-profile radio1
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1336
configure wireless port interface
command
ExtremeWare 7.7 Command Reference Guide