Configure Netlogin Dot1X Timers Reauth-Period - Extreme Networks ExtremeWare Command Reference Manual

configure netlogin dot1x timers reauth-period

configure netlogin dot1x timers reauth-period <seconds>
Description
This command configures the value of the dot1x reauthentication period.
Syntax Description
seconds Specifies the length of the reauthentication period in seconds. Possible values are 0 and 30 to 7200
seconds. If this value is zero, no reauthentication occurs.
Default
Default reauthentication period is 3600 seconds.
Usage Guidelines
Use this command to configure a specific reauthentication interval other than the default for dot1x.
You can also use this command to disable reauthentication by setting the timer value to zero.
Example
The following example configures a reauthentication interval of 4800 seconds:
configure netlogin dot1x timers reauth-period 4800
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
configure netlogin dot1x timers reauth-period
895