Extreme Networks ExtremeWare Command Reference Manual page 1483

Version 7.7
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

Field
Nbr
RB State
RB ID
ActiveOpenPort
EAPS Domain List
Example
The following command displays shared-port statistics on "eaps2", "eaps3", and "eaps4": The EAPS
domain is in a "ready" state in this example:
show eaps shared-port
The results for this command are as follows:
BD_3_42:7 # show eaps shared-port
EAPS shared-port count: 1
Shared-port
-----------
1:1
EAPS Domain list: "eaps2" "eaps3" "eaps4"
History
This command was first available in ExtremeWare 7.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
ExtremeWare 7.7 Command Reference Guide
Description
• Err—Indicates that the EAPS instance on the other end of the
The ID of the root blocker. If the value is none, there are not two or
more common-link failures.
Link
Mode
Id
Up
----------
----
--
Controller
2
Y
Yes—Indicates that the EAPS instance on the other end of the
common link is configured with matching link ID and opposite
modes. For example, if one end of the common link is configured as
a controller, the other end must be configured as a partner.
common link is configured with a matching link ID, but the modes
are configured the same. For example, both modes are configured
as controller, or both modes are configured as partner.
No—The neighbor on the other end of the common link cannot be
reached. Indicates one or more of the following:
- The switch on the other end of the common link is not running.
- The shared port has not been created.
- The link IDs on each side of the common link do not match.
- The common link, and any other segment, between the controller
and partner are not fully connected.
None—This EAPS shared-port is not the "root blocker".
Active—This EAPS shared-port is the "root blocker" and is currently
active.
Inactive—This EAPS shared-port is the "root blocker" but is currently
inactive.
None—Indicates that there is no Active-Open port on the VLAN.
Port #—Indicates the port that is Active-Open and is in a forwarding
state.
Lists the EAPS domains that share the common link.
Domain Vlan
State
count
count
---------
------ -----
Ready
3
1
show eaps shared-port
RB
RB
Nbr State
Id
--- ------- -----
Yes None
None
1483

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.7

Table of Contents