Configure Security-Profile Dot11-Auth Network-Auth Encryption - Extreme Networks ExtremeWare Command Reference Manual

configure security-profile dot11-auth network-auth
encryption
configure security-profile <name> dot11-auth <open | shared> network-auth
<none | dot1x |mac-radius |web-based | wpa | wpa-psk | wpa2 | wpa2-psk>
encryption <none | aes |tkip | aes-tkip | wep64 | wep128>
Description
Enables dot11 authentication, network authentication, and encryption.
Syntax Description
name
open
shared
none
dot1x
mac-radius
web-based
wpa
wpa-psk
wpa2
wpa2-psk
none
aes
aes-tkip
tkip
wep64
wep128
Default
N/A
Usage Guidelines
The following table lists the valid combinations of authentication and encryption:
Dot11 Authentication
open
ExtremeWare 7.7 Command Reference Guide
Specifies the names of the security profile.
Indicates that no 802.11 level authentication is imposed.
Indicates shared key authentication
Indicates that no network authentication is imposed.
Specifies that 802.1x network authentication is used.
Specifies MAC level authentication using the RADIUS server
Specifies use of network login for authentication.
Specifies WPA1 authentication with RADIUS.
Specifies WPA1 authentication with pre-shared keys.
Specifies 802.11i (WPA2) authentication with RADIUS.
Specifies 802.11i (WPA2) authentication with pre-shared keys.
Specifies that no encryption is used.
Specifies that Advanced Encryption Standard (AES) is used.
Specifies that AES or TKIP can be used.
Specifies that Temporal Key Integrity Protocol (TKIP) is used.
Specifies that Wired Equivalent Privacy (WEP) encryption is used with 64-bit keys.
Specifies that Wired Equivalent Privacy (WEP) encryption is used with 128-bit keys.
Network Authentication
none

configure security-profile dot11-auth network-auth encryption

Encryption
Choices:
• none
• wep64
• wep128
919