Enable Ignore-Stp Vlan - Extreme Networks ExtremeWare Command Reference Manual

STP Commands

enable ignore-stp vlan

enable ignore-stp vlan <vlan name>
Description
Configures the switch to ignore the STP protocol and not block traffic for the VLAN(s).
Syntax Description
vlan name Specifies a VLAN name.
Default
Disabled
Usage Guidelines
This command is useful when multiple VLANs share the same physical ports, but only some of the
VLANs require STP protection.
To allow a VLAN to use STP port information, use the command.
disable ignore-stp vlan
Example
The following command enables the ignore-stp option on the VLAN accounting:
enable ignore-stp accounting
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 6.2a and ExtremeWare
7.1e.
Platform Availability
This command is available on all platforms.
1618 ExtremeWare 7.7 Command Reference Guide