Configure Wireless Ports Interface Client-Scan Removed-Trap - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands
configure wireless ports interface client-scan
removed-trap
configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
removed-trap [on |off]
Description
Enables or disables traps from the client-scan feature when a new client has aged-out of the table.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
on Enables traps when a client has aged out of the table.
off Disables traps when a client has aged out of the table.
Default
Off
Usage Guidelines
Enabling traps can saturate management stations if an area is heavily populated.
Example
The following command disables traps for port 1:9 and interface 1:
configure wireless port 1:9 interface 1 client-scan removed-trap off
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1332 ExtremeWare 7.7 Command Reference Guide