Show Wireless Ports Interface Pae-Diagnostics - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show wireless ports interface pae-diagnostics

show wireless ports [<portlist> | all] interface [1 | 2] pae-diagnostics
{detail}
Description
Displays Port Authentication Entity (PAE) diagnostics for the selected port and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
Use this command to display the PAE diagnostics of the clients associated with the access point (AP).
Examples
The following example lists the output of the PAE diagnostics for ports 1:11 on interface 2:
show wireless ports 1:11 interface 2 pae-diagnostics
The output of the command is similar to:
PAE Diagnostic Statistics
CLIENT MAC Port Intf Failures Timeouts Success Logoffs ReAuth
================================================================================
00:0D:54:98:AC:35 1:11 2 0 0 2 0 0
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1424 ExtremeWare 7.7 Command Reference Guide