Extreme Networks ExtremeWare Command Reference Manual page 1129
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
unconfigure vlan dhcp-options
NOTE
You can configure multiple DHCP address ranges for a VLAN. The start-addr option in the command
(50.0.0.5 in this example) specifies the exact DHCP address range for which the command applies. If
the last option is not specified, the command is applied for the primary subnet.
History
This command has been modified so that clearing the DHCP options for secondary or remote subnets is
possible (through the addition of the parameter
). This enhanced command was made
start-addr
available in ExtremeWare 7.3.0. and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
1129
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeCloud NMS-A-25
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?