Extreme Networks ExtremeWare Command Reference Manual page 1433

Hide thumbs Also See for ExtremeWare:

Table of Contents

show wireless ports log

[3] Jul 26 17:14:56 :1 WEP Encryption Mode set to 128-BIT Encryption

[3] Jul 26 17:14:56 :2 Web netlogin mode disabled

[3] Jul 26 17:14:56 :1 Web netlogin mode disabled

[3] Jan 01 00:00:12 :2 Authentication state time updated to 600

[3] Jan 01 00:00:12 :2 Association state time updated to 600

[3] Jan 01 00:00:12 :1 Authentication state time updated to 600

[3] Jan 01 00:00:12 :1 Association state time updated to 600

[3] Jan 01 00:00:12 :2 Max association clients updated to 100

[3] Jan 01 00:00:11 :1 Max association clients updated to 100

[3] Jan 01 00:00:11 :2 Long Retry Limit updated to 7

[3] Jan 01 00:00:11 :1 Long Retry Limit updated to 7

[3] Jan 01 00:00:11 :2 Short Retry Limit updated to 4

[3] Jan 01 00:00:11 :1 Short Retry Limit updated to 4

[3] Jan 01 00:00:11 :1 Preamble mode set to SHORT

[3] Jan 01 00:00:10 :2 RTS Length updated to 2330

[3] Jan 01 00:00:10 :1 RTS Length updated to 200

[3] Jan 01 00:00:10 :2 Fragmentation Threshold updated to 2345

[3] Jan 01 00:00:10 :1 Fragmentation Threshold updated to 1200

[3] Jan 01 00:00:10 :2 Beacon Interval updated to 40

[3] Jan 01 00:00:10 :1 Beacon Interval updated to 40

[3] Jan 01 00:00:00 Wireless Port Up

[3] Jan 01 00:00:00 Boot reason: Power-on Boot

S300-24-FZ:37 #

This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.

Platform Availability

This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7