Disable Netlogin Dot1X Guest-Vlan Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

disable netlogin dot1x guest-vlan ports

disable netlogin dot1x guest-vlan ports [all | <port-list>]
Description
Disables a guest VLAN for the specified 802.1x netlogin ports.
Syntax Description
all Disables the guest VLAN on all ports.
<port-list> Specifies one or more ports or slots and ports on which the guest VLAN is disabled. On a
modular switch, can be a list of slots and ports. On a stand-alone switch, can be one or more
port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Default
By default, the guest VLAN is disabled.
Usage Guidelines
The guest VLAN is not supported on wireless ports.
To enable the guest VLAN, use the following command:
enable netlogin dot1x guest-vlan ports [all | <port-list>]
Example
The following command disables the guest VLAN on ports 3 and 5:
disable netlogin dot1x guest-vlan ports 3,5
The following command globally disables the guest VLAN:
disable netlogin dot1x guest-vlan ports all
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms except the Altitude 300 Access Point.
1000 ExtremeWare 7.7 Command Reference Guide