Configure Wireless Ports Interface Security-Profile - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface security-profile

configure wireless ports <portlist> interface [1 | 2] security-profile
<name>
Description
Attaches a port or ports and interface to a security profile.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface Specifies an interface: 1 or 2.
name Specifies the name of the profile.
Default
Unsecure
Usage Guidelines
Each wireless port on the Summit 300 contains two interfaces. Interface 1 supports 802.11a, and
interface 2 supports 802.11b/g radio signals. The
allows you to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the security profile secure-wep to interface 1 on port 1:7 on a Summit
300-48:
configure wireless port 1:7 interface 1 security-profile secure-wep
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface security-profile
configure wireless port interface
command
1337