disable arp-learning
disable arp-learning
From ExtremeWare 7.7, this command is modified to:
disable ip-security arp learning learn-from-arp
Description
Disables the ARP-learning feature on the switch.
Syntax Description
This command has no arguments or variables.
Default
By default, ARP learning is enabled.
Usage Guidelines
This feature applies only to the layer 3 environment. The switch allows only those hosts whose IP
addresses are assigned by the locally configured DHCP server (switch acting as a DHCP server) or
assigned by an external DHCP server. In the latter case, the switch should be configured as a BootP
relay.
Example
N/A
History
This command was first available in ExtremeWare 7.3.0. and ExtremeWare 7.3e.
This command is modifed in ExtremeWare 7.7.0. The new command is:
disable ip-security arp learning learn-from-arp
Both the commands can be used in ExtremeWare 7.7.0.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
disable arp-learning
989