Wireless Commands
show wireless ports interface client-history diagnostics
show wireless ports [<portlist> | all] interface [1 | 2] client-history
diagnostics <mac_address>
Description
Displays counters and errors the information collected on a per-client basis.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in
the form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all
Specifies all active ports.
interface
Specifies an interface: 1 or 2.
mac_address
Specifies the MAC address of the wireless client.
Default
N/A
Usage Guidelines
Use this command to display diagnostic counters and error information contained in the
extremeWirelessClientDiagTable.
Example
The following example displays client-history diagnostics information for port 1:25 and interface 1
based on the MAC address of the client:
show wireless ports 1:25 interface 1 client-history diagnostics 00:0D:54:98:AC:35
The output of the command is similar to:
Interface
AP Mac Address
State Watermark
Events In Detected
Enters
Errors
AUTH REQ
Other
MGMT Action
Time Outs
Events In Authenticated
Enters
Errors
ASSOC REQ
Other
MGMT Action
Time Outs
Events In Associated
1406
:
1:25:1
:
00:0D:54:98:AC:35
:
FORWARDING
:
1
:
0
:
0
:
1
:
0
:
0
:
1
:
0
:
1
:
1
:
0
:
0
ExtremeWare 7.7 Command Reference Guide