Configure Configuration-Mode - Extreme Networks ExtremeWare Command Reference Manual

Configuration and Image Commands

configure configuration-mode

configure configuration-mode <standard | enhanced>
Description
Configures the default startup configuration for the switch.
Syntax Description
standard Specifies the standard default configuration mode, in which ExtremeWare starts the switch with all
ports in forwarding mode. The default configuration mode is the standard mode.
enhanced Specifies the enhanced default configuration mode, in which ExtremeWare starts the switch with all
ports disabled. The default configuration mode is the standard mode.
Default
The standard mode is the default configuration mode.
Usage Guidelines
This command configures the default startup configuration for the switch. To remove an enhanced
mode configuration and reset the configuration to the default standard configuration mode, use the
unconfigure configuration-mode
Example
The following command sets the default startup configuration for the switch to enhanced mode, in
which the switch will start up with all ports disabled:
configure configuration-mode enhanced
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
1132
command.
ExtremeWare 7.7 Command Reference Guide