Commands for Status Monitoring and Statistics
enable sflow
enable sflow
Description
Globally enables sFlow statistical packet sampling.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
This command enables sFlow globally on the switch. You must enable sFlow globally before you can
enable a "per data source" sFlow. To enable a "per data flow" sFlow, use the following command:
enable sflow ports <portlist>
Example
The following command enables sFlow sampling globally:
enable sflow
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on "i" series platforms.
770
ExtremeWare 7.7 Command Reference Guide