Security Commands
disable access-list
disable access-list <name> [counter | log]
Description
Disables message logging or the collection of access-list statistics.
NOTE
This command is available only on the "i" series switches.
Syntax Description
name
Specifies the name of the access list.
counter
Specifies that access-list statistics collection should be disabled.
log
Specifies that message logging to the Syslog facility for each packet that matches the access-list
description should be disabled.
Default
Counting is on; logging is off.
Usage Guidelines
None
Example
The following command disables statistics collection for access list allow102:
disable access-list allow102 counter
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms only.
988
ExtremeWare 7.7 Command Reference Guide