Disable Log Display - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

disable log display

disable log display
Description
Disables the sending of messages to the console display.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
If the log display is disabled, log information is no longer written to the serial console.
This command setting is saved to FLASH and determines the initial setting of the console display at
boot-up.
In ExtremeWare 7.1.0, the ability to control logging to different targets was introduced. The new
command equivalent to is the following:
disable log display
disable log target console-display
Example
The following command disables the log display:
disable log display
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
744 ExtremeWare 7.7 Command Reference Guide