Configure Wireless Ports Interface Ap-Scan Off-Channel Continuous - Extreme Networks ExtremeWare Command Reference Manual

Version 7.7
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

Wireless Commands
configure wireless ports interface ap-scan off-channel
continuous
configure wireless ports [all | <portlist>] interface [1 | 2] ap-scan
off-channel continuous [on | off]
Description
Turns continuous off-channel scan on or off.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all
Specifies all ports.
interface
Specifies an interface: 1 or 2.
on
Specifies to turn the continuous off-channel scan on.
off
Specifies to turn the continuous off-channel scan off.
Default
Scan on.
Usage Guidelines
Use this command to toggle continuous off-channel on a particular interface either on or off.
Example
The following command turns off the off-channel scan for wireless port 1:5 using interface 2:
configure wireless ports 1:5 interface 2 ap-scan off-channel continuous off
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1318
ExtremeWare 7.7 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.7

Table of Contents