Enable Flowstats Ping-Check - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

enable flowstats ping-check

enable flowstats ping-check {<group#>}
Description
Enables the flow statistics ping-check function for a specified group of collector devices.
NOTE
This command is available only on the "i" series switches.
Syntax Description
group# Specifies the export group for which the ping-check function should be enabled.
Default
Enabled
Usage Guidelines
If a flow-collector device is repeatedly unresponsive to ping requests, it is temporarily removed from
the distribution list for any export groups of which it is a member. The device will be returned to the
distribution list automatically when subsequent ping-checks are successful.
On the PoS module, if you do not include a group number, ping-check is enabled for all export groups.
Example
The following command enables the ping-check function for export group 3.
enable flowstats ping-check 3
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on "i" series platforms.
762 ExtremeWare 7.7 Command Reference Guide