Enable Mac-Lockdown-Timeout Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

enable mac-lockdown-timeout ports

enable mac-lockdown-timeout ports [<portlist> | all]
Description
This command enables the MAC address lockdown timeout feature for the specified port or group of
ports or for all ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports.
Default
By default, the MAC address lockdown timeout feature is disabled.
Usage Guidelines
You cannot enable the MAC lockdown timer on a port that also has the lock learning feature enabled.
For more information about MAC lock learning (MAC address lockdown), see "MAC Address
Lockdown" on page 266.
Example
The following example enables the MAC address lockdown timeout set for ports 3 and 5.
enable mac-lockdown-timeout ports 3,5
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available on all platforms.
1030 ExtremeWare 7.7 Command Reference Guide