Configure Debug-Trace Udp-Forwarding - Extreme Networks ExtremeWare Command Reference Manual

configure debug-trace udp-forwarding

configure debug-trace udp-forwarding <debug level> vlan <vlan name>
Description
This command is not currently supported.
Syntax Description
debug level
vlan name
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.
Specifies a VLAN name.
configure debug-trace udp-forwarding
1233