Configure Wireless Ports Interface Client-History Timeout - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface client-history timeout

configure wireless ports [<portlist> | all] interface [1 | 2]
client-history timeout <number>
Description
Use this command to configure the client history timeout interval.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
number Specifies the timeout interval of the client-history table in seconds. Valid numbers are between 0 and n
(any number).
Default
600 seconds
Usage Guidelines
Use this command to specify the timeout interval for the clients in the client history table.
Example
The following example sets the timeout interval for the client-history table for ports 1:1-1:20 and
interface 2 to 100 seconds.
configure wireless ports 1:1-1:20 interface 2 client-history timeout 100
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1330 ExtremeWare 7.7 Command Reference Guide