Configure Stpd Ports Link-Type Edge Bpdu-Filter Disable - Extreme Networks ExtremeWare Command Reference Manual

configure stpd ports link-type edge bpdu-filter disable

configure stpd <spanning tree name> ports link-type edge <port number>
bpdu-filter disable
Description
Disables bpdu filter on the specified edge port for the specified STPD.
Syntax Description
spanning tree name
portlist
Default
Disabled.
Usage Guidelines
This command applies only to ports that have already been configured as edge ports.
Example
The following command disables STP BPDU filter on edge port 4 in STPD s1 on a stand-alone switch:
configure stpd s1 ports link-type edge 4 bpdu-filter disable
The following command disables STP BPDU filter on slot 2, edge port 1 in STPD s1 on a modular switch:
configure stpd s1 ports link-type edge 2:1 bpdu-filter disable
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies an STPD name on the switch.
Specifies one or more ports or slots and ports. On a modular switch, can be a list of
slots and ports. On a stand-alone switch, can be one or more port numbers. May be in
the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
configure stpd ports link-type edge bpdu-filter disable
1599