Configure Wireless Ports Interface Ap-Scan Probe-Interval - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface ap-scan probe-interval

configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
probe-interval <msec>
Description
Use this command to configure the interval between probe request packets for active off-channel
scanning.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
msec Specifies the time between probe request packets in milliseconds. Valid entries are between 50 and
3600000 milliseconds.
Default
100 ms
Usage Guidelines
Use this command to send probe requests at particular intervals on a selected channel during an access
point (AP) scan.
Example
The following example configures the interval between probe request packets to be 10 ms for port 1:9
on interface 2:
configure wireless ports 1:9 interface 2 ap-scan probe-interval 10
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface ap-scan probe-interval
1321