Extreme Networks ExtremeWare Command Reference Manual page 971

source-L4port
source-mac
tos
vlan
vlan-pri
vlan-pri-2bits
Default
N/A
Usage Guidelines
None
Example
The following commands create the access mask and access lists:
create access-mask ipproto_mask ipprotocol ports precedence 25000
create access-list denytcp ipproto_mask ipprotocol tcp ports 2,10 deny
create access-list denyudp ipproto_mask ipprotocol udp ports 2,10 deny
History
This form of the command was first available in ExtremeWare 7.1e.
The
igmp-type
Platform Availability
This command is available on the "e" series platforms only.
ExtremeWare 7.7 Command Reference Guide
Specifies that the source TCP/UDP port should be specified when you create an
access list using this access mask.
Specifies that the source MAC address should be specified when you create an access
list using this access mask.
Specifies that the 3-bit precedence field within the IP ToS field.should be specified
when you create an access list using this access mask.
Specifies that the VLANid should be specified when you create an access list using this
access mask.
Specifies that the 802.1p priority of the VLAN tag should be specified when you create
an access list using this access mask.
Specifies that the two most significant bits of the vlan-pri field should be specified when
you create an access list using this access mask.
and keywords were added in ExtremeWare 7.6.
ipmc-group
create access-mask
971