Configure Wireless Ports Interface Ap-Scan Results Timeout - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports interface ap-scan results timeout

configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
results timeout <time>
Description
This command sets the timeout threshold that sets when entries are aged out from the table.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
time Specifies the time in seconds before an entry is aged out of the results table. Valid numbers are
between 0 and n (any number).
Default
300 seconds
Usage Guidelines
Use this command to specify the age-out time for the clients in the results table.
Example
The following command configures port 1:7 and interface 1 to have a timeout threshold of 5 seconds:
configure wireless ports 1:7 interface 1 ap-scan results timeout 5
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1324 ExtremeWare 7.7 Command Reference Guide